Pros and Cons of Stainless Steel Sink In-stage Installation

Update:21 Aug 2018

Stainless Steel Sink are of excellent quality, but the installation method of the sink will affect the use of the effect. It is important to choose a good installation method.

The finishing effect is to make the side of the sink flush with the countertop of the cabinet. In this way, the side of the sink will not form a step with the table top, so there will be no dirt collection and it is easier to take care of. For the installation of the This basin, the opening is a bit more complicated, because in addition to the normal opening, a hole is required to be lapped on the countertop, that is, a thickness of the edge of the sink. Because of this, the sink will be flush with the countertop, so the process is a bit more complicated. This installation is relatively rare, and neither owners nor workers don’t like it. This installation is also known as flush flush installation, similar to on-stage installation.

The main difference is that the installation in the This needs to be cratered on the countertop itself so that the sink can be level with the countertop. This trough is more like an "improved version of the trough on the stage", which avoids the generation of countertops. Ah, you can put the dishes into the Stainless Steel Kitchen Sink with one hand, and you don't have to worry about the problem of water accumulation.

However, the This trough will wear off some countertops, and the maturity of the countertops will be affected; and the seams will still be exposed, and it will be sooner or later to become black and dirty. Aside from those small problems, the biggest difficulty lies in the opening process.

It is difficult for ordinary workers to accurately measure the size. A slight error will be high and low, and it is difficult to perfect. Often, it is necessary to use computer graphics and laser cutting, and the requirements for opening equipment, process and installation are very high. It is confusing and costly. If you choose to install in the station, we recommend:

Try to choose a shape-shaped sink, don't buy a shaped sink; the installation in the center generally has certain requirements on the width and thickness of the sink. Try to buy a flat and solid edge.