Stainless Steel Sink Colander (Installing Steps)
5, install supporting pendant
Installation of supporting pendants is generally considered to be the last step in the installation of the sink. Generally, only when the sink is bought, the workers will cut the countertops according to the size of the sink and put them into the countertops. When installing, each gap should be filled to avoid water leakage problems in the future.
6, drainage acceptance
After the whole installation of the water tank is completed, the water tank needs to be filled with water to do the drainage test. If there is leakage, the problem should be found immediately.
7, edge banding
After the drainage test ensures that there is no problem, the sink can be edged. When sealing with silicone, it is necessary to ensure that the gap between the sink and the countertop is even and there is no water seepage.
8, clean up
After the installation is completed, the sink (that from the professional Handmade Sink Factory : cadia ) must be cleaned to clean up the debris during installation. Do not use water directly into the water, it is easy to cause blockage.
