Stainless Steel Sink Colander Installation Methods

Update:15 Nov 2018

The single slot is cheap, and in the same installation space, the single slot can obtain more space for use. That is to say, the same large hole is opened on the table, and the use space of the single-slot basin is larger than that of the double-slot. In addition, there is only one water in the single tank, and the sewage pipeline is simpler than the double tank.

Double slots are expensive, and the same installation space can be used more conveniently, such as two slots, one can be used to brush pots, wash rags and other dirty spots. The other is used to wash dishes, wash vegetables, wash fruits and so on. There are two launches in the double tank, the sewage pipeline is more complicated, and the probability of bad is also high. In addition, with a double tank, you can use a tank to wash greasy things, a tank to wash things that are refreshing; with a single tank, due to the large operating space, there will be less water splashing outside.

Stainless steel sinks are not as deep as possible. When washing, there is very little need to fill up the water. The basin is too deep. When it is filled with water, it is wasted water resources, and it takes time and it is necessary to bend over when it is not full of water. However, if the stainless steel sink is too shallow, it will cause splashing of the water. Therefore, the domestic stainless steel Handmade Sink is generally 180-210mm.

The Stainless Steel Sink Colander itself does not change color. However, some stainless steel sinks have been placed for a long time, especially on display racks, the color will become dim, and some will even have some mildew. This is because the stainless steel sink is placed for a long time, especially during the display, the dust is hidden in the frosted surface of the basin surface, which reduces the surface finish of the product, and some encounter moisture and even mildew. This phenomenon can be wiped off with a gauze dampened with detergent or talcum powder.