In many people's home bathroom use stainless steel faucet, stainless steel kitchen faucet has the advantage of beautiful, generous and practical. But it also has small drawbacks: the stainless steel kitchen faucet after use for a period of time, its surface gloss will be significantly reduced, began to appear foggy or surface hair, looks old, which seriously affected the appearance and the time of its selection Original intention. Change it, the cost is too high, and for the new soon after a similar situation will occur, do not change it, too ugly. Is there any economical and convenient way to solve this problem?
First of all, the installation of stainless steel faucet, the faucet should try not to bump with hard objects, do not leave cement, glue and other objects in the surface, so as not to damage the surface coating gloss. If it is a new house, the water supply network is a new shop will certainly have water and other impurities in the sand, the installation should pay attention to the debris in the pipeline cleared, prolonged drainage until the water quality to clear the faucet can be installed.
Second, the pressure is not lower than 0.02mpa case, if you find that the amount of water to reduce, there may be blocked inside the stainless steel faucet. The solution is to use a wrench in the faucet at the outlet gently remove the spout sieve cover, and then carefully clean the impurities installed, the general can recover as ever Again, many people use stainless steel faucets are used to deliberately make some force It is not advisable to tighten the faucet. This will not only prevent leakage, but will cause damage to the seal valve, resulting in the stainless steel kitchen faucet shut off. Finally, to avoid rusting, usually after running out of stainless steel kitchen faucet to tap the surface wipe clean, then the faucet are generally more prominent, so be careful not to bump or pressure to put goods.
Stainless steel faucets in the long-term use of the process of fog or surface hair, because the scale attached to the metal surface, so our task is to remove scale. First, squeeze a little toothpaste on the stainless steel faucet, and then gently brushing with a toothbrush, rinse with water, use an unnecessary stockings to light, then orange peel in the metal surface to play again, because orange peel contains Acid can maintain stainless steel jewelry. Now autumn and winter, oranges is the seasonal food, may wish to make use of, let your stainless steel tap a new look.
Click handmadesink.net for further information.