Stainless steel sinks were introduced to households in the mid-20th century. They are affordable and lightweight, and they are practically unbreakable. However, maintaining the new look of a stainless steel sink can present problems, especially in hard-water areas. Dissolved minerals in the water can cause streaks, spots and dull film on the Stainless Steel Sink Colander . Hard water magnifies the reactions with acids and salts in foods. You can remedy these problems and restore the finish on your stainless steel sink with some simple products.
6 Stainless Steel Stainless Steel Kitchen Sink with Drainboard Refurbishing Tips !
Step 1 - Wash the entire sink interior and rim with hot, soapy water. Use a nonabrasive cleaning pad to dislodge heavy dirt residue.
Step 2 - Soak a cloth rag in pure white vinegar. Lay the rag over the bottom of the sink. The vinegar breaks down hard water residue that can cause dullness. If white residue from hard water exists around the faucet assembly, soak a second rag in vinegar and place it over this residue. Alternatively, use a commercial lime removal product.
Step 3 - Soak the sink with the vinegar for 15 to 20 minutes. Remove the rags and scrub the softened hard water spots with the cleaning pad. Soak and scrub stubborn spots a second time if they are still visible.
Step 4 - Dampen one corner of a clean rag with lighter fluid. Scrub any rust spots with the lighter fluid to remove them, then rinse with cold water. Rust sometimes occurs in deep scratches and dents.
Step 5- Wipe away any dark discolorations with a rag soaked in club soda. Dark rings occur when you set a hot pan in the sink and the heat discolors the steel.
Step 6- Apply a commercial scratch remover formulated for stainless steel to badly scratched sinks, following package instructions. Removers work by buffing away the scratch with a mild abrasive and leaving behind a polish that helps to fill and disguise deeper scratches.
Make it a habit to rinse the sink thoroughly and wipe it dry after use. This is the best way to avoid streaks, spots, and dull film.